1. <th id="wxip0"><pre id="wxip0"></pre></th>
    <em id="wxip0"><strike id="wxip0"><u id="wxip0"></u></strike></em>

    <rp id="wxip0"></rp>
    <rp id="wxip0"></rp>
    <tbody id="wxip0"></tbody>
    <rp id="wxip0"></rp>
    1. <progress id="wxip0"><big id="wxip0"></big></progress>
    2. 濟南科邦機械設備有限公司您身邊的濟南空壓機廠家!
      18765879198

      首頁>企業新聞
      空氣壓縮機除雜的原因及解決方法
      Time:2019-06-28 11:15:25       來源:http://www.592free.com/      

        當我們使用它,我們需要處理壓縮空氣與雜質之前,它可以用于生產??諝鈮嚎s機產生的壓縮空氣一般含有固體雜質和水,所以空氣壓縮機是一套完整的系統。壓縮空氣處理是通過過濾器過濾顆粒雜質和油、液雜質的過程,是對壓縮空氣的初步處理。普通濾芯的底部是不能通過的,雜質一般被收集到濾芯中。通過濾芯到濾芯底部,再通過自動排水除去雜質。然而,在這個過程中會有一些問題。固體雜質不能完全從濾芯上清除,會粘附在濾芯內壁上。這就增加了壓縮空氣的工作阻力,使水和油的含量也會隨著壓縮空氣排出。

        When we use it, we need to deal with compressed air and impurities before it can be used in production. Compressed air produced by air compressor generally contains solid impurities and water, so air compressor is a complete system. Compressed air treatment is a preliminary treatment of compressed air by filtering particulate impurities, oil and liquid impurities through filters. The bottom of the ordinary filter element can not pass through, and impurities are generally collected into the filter element. Through the filter element to the bottom of the filter element, and then through automatic drainage to remove impurities. However, there will be some problems in this process. Solid impurities can not be completely removed from the filter element and will adhere to the inner wall of the filter element. This increases the working resistance of compressed air, so that the content of water and oil will be discharged with compressed air.
      濟南空壓機
        濟南空壓機
        Jinan air compressor
        我們需要配備后處理設備,因為它不能完全清洗。壓縮空氣壓縮機主要對壓縮空氣壓縮機進行冷卻處理,使壓縮水的空氣壓縮機在較低溫度下,部分水會凝結成液體,然后通過自動排水裝置排出。但凍結方式也有一定的局限性。制冷劑的溫度不能低于2℃,否則會發生結冰現象,導致管路堵塞。如果你想要一個非常低的露點,你只能增加壓縮機的功率。這將增加成本。
        We need post-processing equipment because it can't be cleaned completely. Compressed air compressor mainly cooling compressed air compressor, so that compressed water compressor at a lower temperature, part of the water will condense into liquid, and then through the automatic drainage device discharge. But the freezing method also has some limitations. Refrigerant temperature should not be lower than 2 C, otherwise ice will occur, resulting in pipeline blockage. If you want a very low dew point, you can only increase the power of the compressor. This will increase costs.
        我們需要吸附干燥處理,主要通過吸附劑吸附、高壓吸水、低壓再生等方式得到我們想要的干燥空氣。當然,沒有十全十美的吸附劑,也會有一點缺點,吸附劑填充不能完全準確,容易導致能耗大,在這種情況下,更換吸附劑就會更加困難。
        We need adsorption drying treatment, mainly through adsorbent adsorption, high-pressure water absorption, low-pressure regeneration and other ways to get the dry air we want. Of course, without perfect adsorbents, there will also be some shortcomings. The filling of adsorbents can not be completely accurate, which can easily lead to high energy consumption. In this case, it will be more difficult to replace adsorbents.
        以上是濟南空壓機廠家為大家整理的相關內容,想要了解更多,歡迎點擊我們網站http://www.592free.com
        The above is the related content that Jinan Air Compressor Factory sorted out for you. For more information, please click on our website http://www.592free.com.

      電話:0531-85963300     手機:18765879198   地址:濟南市天橋區無影山中路130號重汽彩世界     備案號:魯公網安備 37010502001004號 >

      版權所有:濟南科邦機械設備有限公司 濟南科邦機械主營::濟南空壓機及配件 網址:http://www.592free.com    技術支持:諾商信息  

      魯公網安備 37010502001004號

      1. <th id="wxip0"><pre id="wxip0"></pre></th>
        <em id="wxip0"><strike id="wxip0"><u id="wxip0"></u></strike></em>

        <rp id="wxip0"></rp>
        <rp id="wxip0"></rp>
        <tbody id="wxip0"></tbody>
        <rp id="wxip0"></rp>
        1. <progress id="wxip0"><big id="wxip0"></big></progress>
        2. 久久婷婷五月综合色丁香_亲胸揉屁股膜下刺激视频午夜_丰满少妇被猛烈进入高清播放_三上悠亚ssni绝顶を教え込ま