1. <th id="wxip0"><pre id="wxip0"></pre></th>
    <em id="wxip0"><strike id="wxip0"><u id="wxip0"></u></strike></em>

    <rp id="wxip0"></rp>
    <rp id="wxip0"></rp>
    <tbody id="wxip0"></tbody>
    <rp id="wxip0"></rp>
    1. <progress id="wxip0"><big id="wxip0"></big></progress>
    2. 濟南科邦機械設備有限公司您身邊的濟南空壓機廠家!
      18765879198

      首頁>企業新聞
      空壓機的壓力、排氣量,和功率的國家標準
      Time:2018-11-26 15:21:10       來源:http://www.592free.com/      

      空壓機參數一般就是指這三項指標。用戶到底需要多大排氣量 Q 和多大壓力 P 的空壓機,是根據用戶的用氣設備的具體耗氣量來定的,太大了是一種浪費,太小了不夠用,故而用戶必須根據自己設備的具體情況慎重的選擇型號。一般計算用戶設備的實際耗氣量,再加1.2倍左右的富裕系數就是空壓機排氣量的選型參數。確定壓力是不僅要考慮到設備實際需要的壓力大小,還要考慮管路上的壓力損失,故而要大一些為好。

      Air compressor parameters generally refer to these three indicators. How much air compressor does the user need to exhaust Q and how much pressure P is determined according to the specific gas consumption of the user's gas-using equipment. Too much is a waste and too small is not enough. Therefore, the user must carefully select the type according to the specific situation of his equipment. Generally, the actual air consumption of user equipment is calculated, and the selection parameters of air compressor exhaust volume are added about 1.2 times the affluence coefficient. To determine the pressure is not only to take into account the actual needs of the equipment pressure, but also to consider the pressure loss in the pipeline, so it is better to be larger.
      國家經貿委于2002年12月27日發布,2003年4月1日實施的《中華人民共和國機械行業標準》JB/T6430-2002中的一般用噴油螺桿空氣壓縮機中,關于流量Q、壓力P和電機功率KW之間的對應關系,有著明確的規定。
      濟南空壓機
      The State Economic and Trade Commission promulgated on December 27, 2002. In the General Injection Screw Air Compressor JB/T6430-2002, which was implemented on April 1, 2003, there are clear provisions on the corresponding relationship among flow Q, pressure P and motor power KW.
      排氣量Q指的是空壓機每分鐘的排氣量,這是一種習慣的說法,實際上指的是空壓機進口的空氣流量。比如LGB-10/8的空壓機,給用戶交流時說的就是排氣量是10 m3的空壓機,實際上指的是每分鐘吸入標準大氣壓情況下的10 m3的空氣,換算成8公斤時的實際流量應該是10÷8≈1.25 m3的真實排氣量。也就是說LGB-10/8在8公斤時的真實排氣量應是1.25 m3左右。
      Exhaust Q refers to the air compressor exhaust per minute, which is a customary term, in fact refers to the air compressor inlet air flow. For example, LGB-10/8 air compressor, when communicating with users, means that the exhaust volume is 10 m3 air compressor. In fact, it refers to 10 m3 air inhaled at standard atmospheric pressure every minute. When converted into 8 kg, the actual flow should be 10_8_1.25 m3 real exhaust volume. That is to say, the actual exhaust volume of LGB-10/8 at 8 kg should be about 1.25 m3.
      吸入量和排氣量的大致換算公式是:
      The approximate conversion formulas for inhalation and exhaust are as follows:
      Q高壓流量≈Q進口流量(排氣量)÷P排氣壓力
      Q High Pressure Flow Q Inlet Flow P Exhaust Pressure
      最科學的說法應是空壓機的容積流量,也即轉子每轉一圈空壓機的排氣量是多少,這是衡量機頭優劣機頭大小的一個硬指標。
      The most scientific statement should be the volume flow of the air compressor, that is, the exhaust volume of the air compressor at each turn of the rotor, which is a hard index to measure the size of the head.
      本文由濟南空壓機友情奉獻.更多有關的知識請點擊:http://www.592free.com我們將用先進的技術.真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.
      This article is dedicated by Jinan Air Compressor Friendship. For more knowledge, please click: http://www.592free.com. We will use advanced technology and sincere attitude to provide you with comprehensive services. More relevant knowledge will be dedicated to you one after another. Please look forward to it.

      電話:0531-85963300     手機:18765879198   地址:濟南市天橋區無影山中路130號重汽彩世界     備案號:魯公網安備 37010502001004號 >

      版權所有:濟南科邦機械設備有限公司 濟南科邦機械主營::濟南空壓機及配件 網址:http://www.592free.com    技術支持:諾商信息  

      魯公網安備 37010502001004號

      1. <th id="wxip0"><pre id="wxip0"></pre></th>
        <em id="wxip0"><strike id="wxip0"><u id="wxip0"></u></strike></em>

        <rp id="wxip0"></rp>
        <rp id="wxip0"></rp>
        <tbody id="wxip0"></tbody>
        <rp id="wxip0"></rp>
        1. <progress id="wxip0"><big id="wxip0"></big></progress>
        2. 久久婷婷五月综合色丁香_亲胸揉屁股膜下刺激视频午夜_丰满少妇被猛烈进入高清播放_三上悠亚ssni绝顶を教え込ま